Sammenlign produkter

19503
29017
29049
600504
600508
Produktnr.
19503
29017
29049
600504
600508
Beskrivelse

Stagg GSW-40 BK

String winders with bridge pin remover
40 pcs in black, displayed in a plastic bott

LR BAGGS ANTHEM-SL-SS (SPLIT-SADDLE)



STUDIO MIC'D SOUND WHEREVER YOU PERFORM
The Award-winning Anthem series, featuring our patented TRU MIC technology, seamlessly combines a 
proprietary condenser microphone with our acclaimed Element pickup to deliver the warmth and fidelity 
of a studio-mic’d guitar anywhere you perform.  

TRU MIC TECHNOLOGY
At the heart of the Anthem is a revolutionary microphone engineered to capture a dynamic studio-mic’d 
sound for any live performance. The TRU MIC mounts to the underside of the bridge plate and hovers just 
3 mm above its surface to take advantage of the PZM or “boundary” effect. This proprietary mounting system, 
combined with noise cancellation, frees the mic to perform as if it were outside of the guitar in a studio 
and maintain remarkable feedback suppression for the stage. The result is a balanced frequency response 
with excellent clarity for the purest sound you have ever heard amplified. We have paired the Element 
pickup with the TRU MIC to provide solidity and punch for low frequencies.

ANTHEM SL
For those of you who prefer a minimalist approach to controls, the Anthem SL delivers the same groundbreaking 
studio mic’d fidelity as the Anthem in a streamlined format with a single volume control. The endpin preamp has 
all-discrete circuitry for the purest signal and the TRU•MIC is premixed with the Element for optimum performance.

- The patented TRU MIC carries the majority of the guitars’ frequency range while the Element Pickup carries 
only the lowest frequencies
- The mic is highly feedback-resistant
- Noise cancelling microphone technology eliminates any annoying honky or boxy qualities from the inside of 
the guitar
- Mic installs easily on the bridge plate with peel and stick adhesive
- Mic and pickup levels preset for optimum performance
- Soundhole remote includes volume and mic trim controls
- All discrete pre-contoured endpin preamp with preset crossover
- Element Pickup fits most common string spacings and saddle width
- Comes with battery bag for secure and unobtrusive battery retention
- Model available for nylon string guitars

FEATURES
Custom Element pickup 
Easy-in pull guide
Miniature endpin preamp
Soundhole mounted volume control
Super light-weight
Battery type: single 3V
Battery life: 300+ hours

The FIVE.O is small, light-weight, and best of all, specifically engineered to track the uke’s unmistakably 
unique voice. The system combines a custom version of our award winning Element pickup, a soundhole 
mounted volume control, and a miniature endpin preamp powered by a 3V battery. We radically miniaturized 
our design so that the complete system weighs less than a 9V battery and tucks away neatly inside of the 
small instrument for a non-invasive installation. The pickup also features a pull guide to facilitate faster 
installations.



Shubb C5 er utviklet for banjo, mandolin og bouzouki.

Passer gitarer med 7,25" radius, blant annet enkelte vintage Telecaster- og Stratocaster-modeller. De fleste 
elektriske gitarer har ikke denne kraftige radiusen og bør derfor bruke Shubb modell 1.

Shubb-capoen ble introdusert i 1974 og har siden blitt et populært valg blant gitarister over hele verden. Det har 
blitt gjort noen justeringer gjennom årene, men det grunnleggende mekaniske prinsippet er fortsatt det samme.

Den unike over-center-låsemekanismen gir en kombinasjon av godt trykk, rask betjening, presisjon og enkel bruk. Med 
én jevn bevegelse låses capo-en sikkert på plass, og den tas av like raskt.

Den myke og fleksible gummiputen er utviklet for å fungere på samme måte som en fingertupp. Den presser strengene 
jevnt mot båndene uten å trekke dem sideveis, noe som bidrar til å redusere behovet for etterstemming.

Laget i messing.




SHUBB FS Fifth String Capo for Banjo

The Shubb Fifth String Capo for Banjo

This was the product that got it all started for us back in 1974, and to this day it's 
STILL the only fifth string capo worth putting on a banjo. It operates on a lever principle,
not a spring, so it provides sufficient pressure to fret the string without muting the tone. 
It slides on a slim, dovetailed bar which mounts flush to the neck, making it sturdy and unobtrusive.


Originally, our fifth string capo bar was eight inches long, and attached to the banjo neck with 
three mounting screws. A few years ago we remodeled the bar, a change which I'd long considered. 
I personally never capo the fifth string any higher than the tenth fret (this would go along with 
the regular capo being at the fifth fret). So for my own banjo, I made a custom bar which was much 
shorter (5.75"). This shorter bar is now our standard size. Besides taking up less space on the neck 
(for you fellow thumb-wrappers), it offers the additional advantage of using only TWO mounting screws 
instead of three.

If you feel that you want to be able to capo all the way up to the thirteenth fret, the original 
eight inch, three-screw bar is still available. The price is the same.
--

Installation

We strongly recommend that you have a luthier or repair person install your fifth string capo. 
Most places that work on instruments can mount it for you in just a few minutes. Or if you 
are handy with small tools, and not shy about working on your banjo, you could install it yourself. 
In either case, the Shubb Company is not responsible for the quality or consequences of the 
installation process.

Installation instructions are provided in the package, but in case you've lost the insert, 
you can download the instructions here.

ftp://ftp.sonic.net/pub/users/shubb/FS%20installation7.pdf

Expert luthier Frank Ford has provided an excellent description of the proper installation 
at his website. Even if you have a pro install your capo, it would still be helpful to refer 
them to Frank's description, since he has considerable experience at installing these capos. 
I also suggest taking a look at his page regarding fifth string nuts.

http://www.frets.com/FretsPages/Musician/Banjo/5thNut/5thnut.html